Metallic Carbon Fiber HTV 12" x 19.5" Sheets *Free Shipping*

Description

Untitled Document
COLOR CHART
BLACK
Cutter Setting
Cricut®
Silhouette Cameo
Scan N Cut
Roland GS/GX-24
Graphtec
Blade: Standard
Setting: Iron On
Blade: Standard, 3
Material: Heat Transfer,
Smooth
Speed: 8
Force: 6
Blade: Standard,2
Cut Speed: 1
Cut Pressure: 1
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 25 cm/s
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Application instructions (home iron)
Application Instructions (heat press)
- Set iron dial between Cotton and Linen.
- Cover design with Kraft paper or non-stick cover sheet.
- Place on flat, hard surface (ironing board not recommended).
- Press iron with medium/firm pressure (do not slide iron).
- Press each section of design for 10-15 seconds.
- If areas of design lift after application, replace cover sheet and re-press for
5-10 seconds.
- Peel carrier hot
- Cut in Reverse.
- Weed excess material.
- Preheat garment for 2-3 seconds.
- Apply design at 320°F/160°C.
- Use medium pressure for 10-15 seconds.
- Peel carrier hot.
Recommended Accessories and Care
Applies to
Recommended Accessories
Laundering
100% cotton
100% polyester
Poly/cotton blends
Siser Weeder
Multipurpose Paper or
Kraft Paper or Heat Transfer
Cover Sheet
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Specifications:
Polyester Composition • Pressure sensitive backing • Gloss finish • 190 Microns/7.5 Mils • 45°/60° blade •
Layering not recommended
Payment
Shipping
Payment and Return/Exchange
Same Day or 1 day Shipping for orders placed
before 3:00 PM (Monday-Friday)
2-4 business day transit time.
See map above
Change pick up hours to Monday-Friday 8:00-4:00.
Same day pick up as long as order is placed
before 3:00 PM.
Please bring valid ID and invoice.